Bison Self-Centering Milling Fixture 9417-200 FM US - 7-640-0840
Brand: Bison- SKU:
- 7-640-0840
- ID:
- 972998
Bison Self-Centering Milling Fixture 9417-200 FM US - 7-640-0840
The Bison 9417-200 FM US Self-Centering Milling Fixture is a 200 mm (8-inch) low-profile, four-jaw stationary chuck designed for secure workpiece holding during machining operations. Manufactured by Bison, this fixture features a robust cast iron body and standard precision construction for dependable workholding applications.
The four-jaw configuration provides workpiece clamping, while its wide clamping range and long jaw travel accommodate different workpiece sizes. The low-profile construction offers a compact workholding solution for machining setups where fixture height is an important consideration.
The fixture features a sealed construction designed to prevent machining chips from entering its internal mechanism. It is supplied with one set of hard top jaws, one set of hard master jaws, and one wrench with ratchet.
SPECIFICATIONS
| Brand | Bison |
|---|---|
| Product Name | Self-Centering Milling Fixture |
| Series | 9417 |
| Model | 9417-200 FM US |
| Product Type | Low-Profile 4-Jaw Stationary Chuck |
| Nominal Size | 200 mm (8 inches) |
| Number of Jaws | 4 |
| Body Material | Cast Iron |
| Precision Classification | Standard Precision |
| Clamping Range | Wide clamping range |
| Jaw Travel | Long jaw travel |
| Construction | Low-profile construction |
| Chip Protection | Sealed against chips |
| Bison Catalog Code | 7-640-0840 |
| Weight | 53 lb (24.0 kg) |
TECHNICAL DIMENSIONS
Dimensional specifications for the Bison 9417-200 FM US four-jaw stationary chuck are provided below.
| ØA | ØA1 | B | B1 | ØE | F | G | H | J | K | L | M | □S | n × J |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 11.42 | 8.66 | 2.56 | 0.87 | 1.77 | 3.15 | 2.31 | 0.37 | 1.06 | 0.67 | 0.47 | — | 0.43 | 0.16 |
Note: All dimensional values are in inches, as specified in the Bison manufacturer catalog.
KEY FEATURES
- Four-Jaw Configuration: Four-jaw stationary chuck design for machining workpiece holding.
- Standard Precision: Manufactured as a standard precision chuck.
- Cast Iron Body: Robust cast iron body construction.
- Wide Clamping Range: Accommodates different workpiece sizes.
- Long Jaw Travel: Provides extended jaw travel for flexible clamping.
- Low-Profile Design: Compact construction helps reduce fixture height within the machine setup.
- Sealed Construction: Sealed against chips to help protect the internal fixture mechanism.
STANDARD ACCESSORIES INCLUDED
The Bison 9417-200 FM US is supplied with the following standard accessories:
- 1 set of hard top jaws
- 1 set of hard master jaws
- 1 wrench + ratchet
APPLICATIONS
The Bison 9417-200 FM US is designed for machining applications requiring a low-profile four-jaw stationary chuck. Its wide clamping range and long jaw travel make it suitable for holding different workpiece sizes during machining operations.
- Workpiece holding during milling operations.
- Four-jaw machining applications.
- Machine-table workholding setups.
- Machining setups requiring a low-profile stationary chuck.
- Applications requiring a wide clamping range and long jaw travel.
SAFETY AND OPERATING INSTRUCTIONS
- Ensure the fixture is securely mounted before beginning machining operations.
- Check that the workpiece is properly positioned and clamped before operating the machine.
- Inspect the jaws and clamping components for wear or damage before use.
- Keep the fixture clean and maintain its sealed construction.
- Use the supplied wrench and ratchet for the intended fixture operation.
- Follow the manufacturer's installation, maintenance and operating instructions.
FREQUENTLY ASKED QUESTIONS
What is the Bison 9417-200 FM US?
The Bison 9417-200 FM US is a 200 mm (8-inch) low-profile, four-jaw stationary chuck designed for workpiece holding during machining operations.
How many jaws does this fixture have?
This model features a four-jaw configuration.
What material is used for the fixture body?
The fixture features a cast iron body.
What precision classification does this chuck offer?
The manufacturer identifies the Bison 9417 series as a standard precision chuck.
What is the nominal size of this model?
The Bison 9417-200 FM US has a nominal size of 200 mm (8 inches).
Is the fixture sealed against chips?
Yes. The manufacturer specifies that the fixture is sealed against chips.
What standard accessories are included?
It includes one set of hard top jaws, one set of hard master jaws, and one wrench with ratchet.
What is the weight of this fixture?
The manufacturer's catalog specifies a weight of 53 lb (approximately 24.0 kg).
What is the Bison catalog code for this model?
The Bison catalog code is 7-640-0840.
What are the key features of the Bison 9417 series?
The series features a low-profile design, wide clamping range, long jaw travel, cast iron body and sealed construction.
What is the difference between the Bison 9416 and 9417 series?
The Bison 9417 is a four-jaw stationary chuck series, while the Bison 9416 is a three-jaw stationary chuck series.
How do I select the correct Bison 9417 model?
Select the model based on the required nominal chuck size, workpiece dimensions, clamping requirements and available machine setup space. Refer to the individual model's technical dimensions before purchasing.
View All Bison 9417 Self-Centering Milling Fixtures
For more info, visit www.p65warnings.ca.gov.

