Bison Self-Centering Milling Fixture 9417-315 FM US - 7-640-1240

Brand:   Bison
SKU:
7-640-1240
ID:
973000
callling
$5,275.00
Current Stock:
Adding to cart… The item has been added

    

Bison Self-Centering Milling Fixture 9417-315 FM US - 7-640-1240

The Bison 9417-315 FM US Self-Centering Milling Fixture is a 315 mm (12-inch) low-profile, four-jaw stationary chuck designed for secure workpiece holding during machining operations. Manufactured by Bison, this fixture features a robust cast iron body and standard precision construction for dependable workholding performance.

The four-jaw configuration provides workpiece clamping, while the wide clamping range and long jaw travel accommodate different workpiece sizes. Its low-profile construction provides a compact workholding solution for machining setups where available machine space and fixture height are important considerations.

The fixture features a sealed construction designed to prevent machining chips from entering its internal mechanism. The Bison 9417-315 FM US is supplied with one set of hard top jaws, one set of hard master jaws, and one wrench with ratchet, according to the supplied Bison 9417 catalog.

SPECIFICATIONS

Brand

Bison

Product Name

Self-Centering Milling Fixture

Series

9417

Model

9417-315 FM US

Product Type

Low-Profile 4-Jaw Stationary Chuck

Nominal Size

315 mm (12 inches)

Number of Jaws

4

Body Material

Cast Iron

Precision Classification

Standard Precision

Clamping Range

Wide clamping range

Jaw Travel

Long jaw travel

Construction

Low-profile construction

Chip Protection

Sealed against chips

Manufacturer Part Number

329417250900

Bison Catalog Code

7-640-1240

Weight

131.4 lb (59.6 kg)

 

TECHNICAL DIMENSIONS

Refer to the following dimensional specifications for the Bison 9417-315 FM US four-jaw stationary chuck.

ØA

ØA1

B

B1

ØE

F

G

H

J

K

L

M

□S

n × J

15.95

13.19

3.15

0.95

3.15

4.33

2.81

0.51

1.46

0.79

0.71

M8

0.55

0.16

Note: All dimensional values are in inches, as specified in the Bison manufacturer catalog. M8 indicates the metric thread specification.

 

KEY FEATURES

  • Four-Jaw Configuration: Four-jaw stationary chuck design for workpiece clamping and positioning.
  • Standard Precision: Manufactured as a standard precision chuck.
  • Cast Iron Body: Robust cast iron body construction.
  • Wide Clamping Range: Accommodates different workpiece sizes.
  • Long Jaw Travel: Provides extended jaw travel for flexible clamping.
  • Low-Profile Design: Compact construction helps reduce fixture height within the machine setup.
  • Sealed Construction: Sealed against chips to help protect the internal fixture mechanism.

STANDARD ACCESSORIES INCLUDED

According to the supplied Bison 9417 catalog, the standard accessories include:

  • 1 set of hard top jaws
  • 1 set of hard master jaws
  • 1 wrench + ratchet

 

APPLICATIONS

The Bison 9417-315 FM US is designed for machining applications requiring a low-profile four-jaw stationary chuck. Its wide clamping range and long jaw travel make it suitable for holding different workpiece sizes during machining operations.

  • Workpiece holding during milling operations.
  • Four-jaw machining applications.
  • Machine-table workholding setups.
  • Machining setups requiring a low-profile stationary chuck.
  • Applications requiring a wide clamping range and long jaw travel.

 

SAFETY AND OPERATING INSTRUCTIONS

  • Ensure the fixture is securely mounted before beginning machining operations.
  • Check that the workpiece is properly positioned and clamped before operating the machine.
  • Inspect the jaws and clamping components for wear or damage before use.
  • Keep the fixture clean and maintain its sealed construction.
  • Use the supplied wrench and ratchet for the intended fixture operation.
  • Follow the manufacturer's installation, maintenance and operating instructions.

FREQUENTLY ASKED QUESTIONS

What is the Bison 9417-315 FM US?
The Bison 9417-315 FM US is a 315 mm (12-inch) low-profile, four-jaw stationary chuck designed for workpiece holding during machining operations.

How many jaws does this fixture have?
This model features a four-jaw configuration.

What material is used for the fixture body?
The fixture features a cast iron body.

What precision classification does this chuck offer?
The manufacturer identifies the Bison 9417 series as a standard precision chuck.

What is the nominal size of this model?
The Bison 9417-315 FM US has a nominal size of 315 mm (12 inches).

Is the fixture sealed against chips?
Yes. The manufacturer specifies that the fixture is sealed against chips.

What standard accessories are included?
The supplied catalog lists one set of hard top jaws, one set of hard master jaws, and one wrench with ratchet.

What is the weight of this fixture?
The manufacturer's catalog specifies a weight of 59.6 kg (approximately 131.4 lb).

What is the Bison catalog code for this model?
The Bison catalog code is 7-640-1240.

What is the manufacturer part number?
The manufacturer part number is 329417250900.

What are the key features of the Bison 9417 series?
The series features a low-profile design, wide clamping range, long jaw travel, cast iron body and sealed construction.

What is the difference between the Bison 9416 and 9417 series?
The Bison 9417 is a four-jaw stationary chuck series, whereas the Bison 9416 is a three-jaw stationary chuck series.

How do I select the correct Bison 9417 model?
Select the model based on the required nominal chuck size, workpiece dimensions, clamping requirements and available machine setup space. Refer to the individual model's technical dimensions before purchasing.



View All Bison 9417 Self-Centering Milling Fixtures 


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Bison Self-Centering Milling Fixture 9417-315 FM US - 7-640-1240

Bison Self-Centering Milling Fixture 9417-315 FM US - 7-640-1240

Bison Self-Centering Milling Fixture 9417-315 FM US - 7-640-…

$5,275.00