Dake Mitering Bandsaw 6.5" Round - SE-6.5M
Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Variable speed with rotary adjusting wheel and “Constant speed control” Maintains constant speed to prevent bog downs when cutting.
- Hydraulic controlled down feed with manual return
- Automatic shut off at the end of the cut
- Dual operating modes, manual cutting or head feed cutting
- Powerful, manual clamping vise, with quick release lever for rapid vise opening and closing action for fast material size change over. The vise clamps material firmly.
- Ergonomic designed for operator’s comfort and control
- Motor gearbox combination bolted to the bow for less vibration
- Variable speed with rotary adjusting wheel and “Constant speed control” Maintains constant speed to prevent bog downs when cutting
- CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch
- Blade tensioning is done via. “Go No Go” tensioning system with LED taking the guess work out of tensioning. Saw will not run if blade tension is not correct
- Miters up to 60° right. Mitering pre-sets with slide stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
- Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
- Electric coolant pump and self-contained coolant system
- 120 volt means you can use it most anywhere
- Steel fabricated base, and stock stop gauge, one Bi-metal blade
| Item No. | SE-6.5M |
| Capacity | 6.5" Round |
| Horsepower | 2.5 |
| Voltage | 120V |
| Max. Blade Speed | Variable |
| Blade Width | 3/4" |
| Blade Length | 84-1/4" |
| Blade Speed | 114-262 FPM |
| Solid Round 90º Capacity | 6.5" |
| Solid Round 45º Right Capacity | 4-1/4" |
| Solid Round 60º Right Capacity | 3" |
| Solid Square 90º Right Capacity | 6-3/4" |
| Solid Square 45º Right Capacity | 4-1/2" |
| Solid Square 60º Right Capacity | 3" |
| Solid Rectangle 90º Capacity | 7-3/4" x 3" |
| Solid Rectangle 45º Right Capacity | 6" x 4-1/4" |
| Solid Rectangle 60º Right Capacity | 4" x 2-3/4" |
| Worktable Height | 37" |
| Height | 65" |
| Floor Space | 35" x 48" |
For More Dake Mitering Bandsaws Click Here
For more info, visit www.p65warnings.ca.gov.
