Mitutoyo Bench-Top Type Laser Scan Micrometer LSM-9506 with Display
Brand: Mitutoyo- ID:
- 89354
Mitutoyo Bench-Top Type Laser Scan Micrometer LSM-9506 with Display
Series 544-Bench Top Type Non-contact Measuring System
Optional Accessories:
- 02AGD170 - Calibration gage set (ø1.0mm, ø60mm)
- 02AGD680 - Adjustable Workstage
- 02AGD580 - Center support**
- 02AGD590 - Adjustable V-block**
- 936937 - SPC output cable (1m)
- 937179T - Footswitch
- 264-012-10 - USB Input Tool for spreadsheets (SPC cable also required)
** Use with an adjustable workstage.
- ** Determined by the value for ±2σ at the measurement interval of 0.32 sec.
- ** At the center of the measuring region
- ** An error due to workpiece shift either in the optical axis direction or in the scanning direction. L= Distance between the center of workpiece and the center of optical axis (in mm or inches)
- ** The area given by "measuring range on the optical axis" x "measuring range in the scanning direction"
- ** FDA Class II (544-116-1A) semiconductor laser for scanning (Maximum power: 1.0mW)
QUICKTOOL is a free software program that makes programming the LSM-6200 quick and easy. Basic data acquisition is also possible. Included as standard accessory. (Connecting cables to PC are optional)
Specifications:
| Model | LSM-9506 |
| Order No | 544-116-1A |
| Measuring Range | 0.02 - 2.36" / 0.5 - 60mm |
| Resolution | 0.000002 - 0.005" / 0.00005 - 0.1mm |
| Repeatability*1 | 0.00003"-0.6um |
| Accuracy*2 (20°C) | Linearity (*2) ± .0001in (±2.5µm) The optical axis direction ± .0001in (±2.5µm) The scanning direction ±(.00008+L/10000)in [L:inch] (*3) ±(2.0+L/10)µm [L:mm] (*3) |
| Positional error*3 (optical axis/scanning direction) | ±2.5µm (±.0001") L: Displacement between workpiece center and optical axis center |
| Measuring Area*4 | 0.02 - 2.36" / 5 - 60mm |
| Scanning Rate | 1600 per sec |
| Laser wavelength | 650nm (Visible)*5 |
| Laser scanning speed | 226m/s (8900" / s) |
| Display Unit | 16-digit dot matrix (upper column) + 7 segment 11-digit (lower column),guidance LEDs |
| Standard interface | RS-232C, Digimatic code output unit (1ch) |
| Optional interface | No |
| Data Output | RS-232C,VO Analog Interface,SPC |
| Power Supply | AC100V to 240V, 50/60Hz, 40VA |
| Operating Enviorment | 0 to 40°C, RH 35 to 85% (no condensation) |
View all of the Optional Accessories for Laser Scan Micrometers
For more info, visit www.p65warnings.ca.gov.
