Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open Bore Gage Interchangeable Head SET, 1”-2”/25.4-50.8mm - 568-930

Brand:   Mitutoyo
SKU:
568-930
ID:
387458
Model --
Range 1” - 2” / 25.4 - 50.8mm
Accuracy --
Head Assy Order No. 04AZA731, 04AZA739, 04AZA740
Mass (g) 930
$3,400.00
Current Stock:
Adding to cart… The item has been added

Mitutoyo

Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open Bore Gage Interchangeable Head SET, 1”-2”/25.4-50.8mm - 568-930

The Borematic enables the operator to take measurements more accurately and more quickly than ever before. Once the origin point is set with the ORIGIN button, the Borematic retains the setting for the entire battery life. Therefore no longer repeated origin setting (presetting) is necessary.

This is a Three-Point Digimatic Snap Open Bore Gauge Set with one display unit and interchangeable heads. It offers you the following benefits:

  • It enables you to take measurements easily and quickly.
  • Titanium-coated measuring pins gives you excellent durability and impact resistance.
  • A large LCD display with character height of 11mm makes measurements easy to read.
  • 330° rotatable display unit also gives you easy reading at any angle.
  • GO/NG tolerance judgement function.
  • It has a function lock to protect the setup against unauthorised use.

Features:

  • TiN-coated measuring contact points provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole.
  • Large LCD digits of 8.5mm height for error-free reading.
  • 330-degree rotatable display unit for easy reading at any angle.
  • GO/NO-GO judgment function.
  • The ABSOLUTE linear encoder eliminates the fear of over-speed errors.
  • With SPC data output.
  • Setting rings for origin point setting are optional.
  • Can measure deep holes by attaching an optional extension rod.
  • Measurement can be taken closer to the bottom of a blind bore.
  • Supplied in fitted wooden case.

Technical Data:

  • Accuracy: Refer to the list of specifications below
  • Resolution: 0.001mm or .00005"/0.001mm
  • Contact point: Carbide or titanium coating* (*over 12mm/.5" models)
  • Measuring method: Three-point method
  • Display: LCD
  • Battery: SR44 (1 pc.) (938882)
  • Battery life: Approx. 7,000 hours

Functions:

  • Zero-Set, presetting, GO/NO-GO judgment, power on/off, inch/mm conversion (inch/mm type only), SPC data output, data hold

Optional Accessories:

  • 905338: SPC cable (1m / 40")
  • 905409: SPC cable (2m / 80")
  • 952322: Extension rod 100mm / 3.94" For range 6-12mm / .275-.5" models
  • 952621: Extension rod 150mm / 5.9" For range 12-20mm / .5" - .8" models
  • 952622: Extension rod 150mm / 5.9" For range 20-50mm / .8" - 2" models
  • 952623: Extension rod 150mm / 5.9" For range 50-300mm / 2"-12" models

Specifications:

Range 1” - 2” / 25.4 - 50.8mm
Individual ranges 1-1.2"
1.2-1.6"
1.6-2"
Setting rings included Ø1.2" (177-289)
Ø1.6" (177-291)
Mass 930 g
Accuracy 0,005 mm (measuring range 6-20 mm)
0,006 mm (measuring range 20-125 mm)
Digital step 0,00005" / 0,001 mm
Measuring face Titanium coated carbide
taper: tungsten carbide
Battery life approx. 5000 hours
Display LCD, character height: 11 mm
Delivered Including box, key, 1 battery, certificate of inspection
ZERO/ABS Yes
GO/±NG judgement Yes
ON/OFF Yes
DATA/HOLD Yes
2 x PRESET Yes
Function lock Yes
Data output Yes
Digital/Analog Digital
PRESET (preselection) Yes
Inch-Metric Inch/Metric
GO/±NG judgement on LCD Yes
DATA / HOLD (Holding value) function Yes


See all Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open Bore Gages

Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open Bore Gage Interchangeable Head SET, 1”-2”/25.4-50.8mm - 568-930

Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open Bore Gage Interchange…

Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open B…

$3,400.00