Mitutoyo RA-H5200AS Roundness/Cylindricity Measuring System - 211-531A
Brand: Mitutoyo- SKU:
- 211-531A
- ID:
- 346597
$0.00
Mitutoyo RA-H5200AS Roundness/Cylindricity Measuring System - 211-531A
RA-H5200AS / AH, a roundness/cylindricity measuring system developed to combine world class accuracy with maneuverability/high analysis capability. Enhanced detector safety functions such as accidental touch and collision detection is installed to minimize damage to both machine and workpieces.
A CNC system combines high accuracy with automatic CNC measurements to improve productivity and efficiency. Automatic orientation control of the detector unit enables this system to automatically execute high-speed, operator-free measurements.
Features:
- Detector unit orientation programmable for CNC measurement.
- The multi-sensor system is compatible with a standard probe that meets the specifications of the roundness measuring system and an optional surface roughness detector unit.
- Mitutoyo's linear encoders have been incorporated into the positioning sensors in the X- and Z-axis drive units to directly sense the displacement, thereby achieving highly accurate positioning essential for repeat measurements.
- The measurement accuracy of a roundness/ cylindricity measuring system is greatly affected by external disturbances such as vibration. Therefore, the RA-H5200 Series is supplied as standard with a high-performance vibration isolator that possesses excellent vibration attenuation.
Technical Data:
| Turntable: | |
| Rotational accuracy (radial) H: Probing height (mm) | (.8+.35H)μin {(0.02+3.5H/10000)μm} |
| Rotational accuracy (axial) X: Distance from the turntable axis (mm) | (.8+.35X)μin {(0.02+3.5X/10000)μm} |
| Rotating speed | 2, 4, 6, 10rpm (20rpm: auto-centering) |
| Table top diameter | ø 11.8” (300mm) |
| Centering range | ±5mm |
| Leveling range | ±1° |
| Maximum probing diameter | ø 15.7” (400mm) |
| Maximum workpiece diameter | ø 26.8” (680mm) |
| Maximum workpiece weight | 176 lbs (80kg) 143 lbs (65kg): auto-centering |
| Vertical column (Z-axis): | |
| Vertical travel | 13.8” (350mm) (21.7” (550mm): AH model) |
| Straightness (λc2.5) | 0.05μm / 100mm, 0.14μm / 350mm (0.2μm / 550mm: AH model) |
| Parallelism with rotating axis | 0.2μm / 350mm (0.32μm / 550mm: AH model) |
| Positioning speed | Max. 60mm/s |
| Measuring speed | 0.5, 1, 2, 5mm/s |
| Maximum probing height | 13.8” (350mm) (OD / ID) [21.7” (550mm) (OD / ID): AH model) |
| Maximum probing depth | over ø32: 85mm (w/standard stylus) over ø7: 50mm (w/standard stylus) |
| Horizontal arm (X-axis): | |
| Horizontal travel | 8.9” (225mm) |
| Straightness (λc2.5) | 0.4μm / 200mm |
| Squareness with rotating axis | 0.5μm / 200mm |
| Positioning speed | Max. 50mm/s |
| Measuring speed | 0.5, 1, 2, 5mm/s |
| Probe and stylus: | |
| Measuring range | ±400μm (±5mm: tracking range) |
| Measuring force | 10mN~50mN (in 5 steps) |
| Standard stylus | 12AAL021, carbide ball, ø1.6mm |
| Measuring direction | Two directional |
| Stylus angle adjustment | ±45° (with graduations) |
| Data analysis system: | |
| Analysis software | Roundpak |
| Filter type | 2CRPC-75%, 2CRPC-50%, 2CR-75% (phase corrected), 2CR-50% (phase corrected), Gaussian, filter OFF |
| Cutoff value | 15upr, 50upr, 150upr, 500upr, 1500upr, 15-150upr, 15-500upr, 15-1500upr, 50-500upr, 50-1500upr, 150-1500upr, Manual setting |
| Reference circles for roundness evaluation | LSC, MZC, MIC, MCC |
| Air supply: | |
| Air pressure | 390kPa (4kgf/cm2) |
| Air consumption | 45L/min. |
| Power supply | 100V AC – 240V AC, 50/60Hz |
| Dimensions (W x D x H) | 49.6 x 28.0 x 66.9” (1260 x 710 x 1700mm) |
| 49.6 x 28.0 x 74.8” (1260 x 710 x 1900mm: AH model) | |
| Mass, Main unit | 1433lbs. (650kg) 1477lbs. (670kg): AH model |
| Vibration isolator | 375 lbs (170kg) |
For more info, visit www.p65warnings.ca.gov.
