Mitutoyo Spindle Attachment Tip, Spline Attachment, 0.078" dia. - 208062

Mitutoyo Spindle Attachment Tip, Spline Attachment, 0.078" dia. - 208062

Spindle Attachment Tip

These spindle attachment tips give you an economical way to adapt a micrometer spindle for different tasks.

Benefits:

• You can use the tips on a micrometer spindle as an economical adaptation for particular measurement applications.
• They can also be mounted on micrometer anvils ø 6.35 mm.
• The measuring range changes when a spindle attachment tip is mounted.

To measure odd workpieces, several convenient anvil attachments are prepared by MITUTOYO. Among them the most often used one is the ball attachment.

The ball attachments are hardened steel balls with .200" and .250" diameters which are placed on the .250" and .315" diameter anvils, respectively, by rubber caps. With these attachments, regular micrometers can measure cylindrical wall thickness, .200" or .250" must be subtracted from the readings.

Other attachments shown here are either .500" or 10mm in length. The added amount must be subtracted from the reading.

Technical Data:

Tip length: metric type: 10mm ±5μm, inch type: .5" ±.0002"
Spindle Dia: *1 .250" / 6.35mm

See all Mitutoyo Spindle Attachment Tips