Suburban Round Magnetic Chuck, Standard Pole, 20-1/4" dia. - RMC-20
Brand: Suburban Tool Inc.-Taft Peirce Metrology- SKU:
- RMC-20
- ID:
- 105144
Pole Spacing | Standard |
Diameter | 20-1/4" |
Height | 3-1/2" |
$12,495.00
Suburban Round Magnetic Chuck, Standard Pole, 20-1/4" dia. - RMC-20
- Made in U.S.A.
- For efficient holding of magnetic work pieces on grinders, lathes, and other machines with rotating spindles.
- Permanent, ceramic magnets provide superior holding power that never fades and require no electrical controls or collector rings.
- Thick top plates are laminated from steel and stainless steel, then furnace brazed into one solid piece and precision ground.
- Top plate can be drilled, tapped or machined to three-fourths of its thickness (approx. 5/8"), if necessary, to allow the use of dowel pins or other mechanisms as locating devices.
- Back surface of aluminum chuck body has Tapped Holes (D) and a Turned Counterbore (B) for convenient mounting to your machine.
- "Partial-On" for holding parts prone to distortion.
- Removable on-off handle included with each chuck.
- All models except 5-1/2" dia (RMC-5) which uses the swing-type on-off method, are sealed against water and other elements.
STANDARD POLE: 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts. (RMC-15 and RMC-20 have 3/8" poles and 3/8" separators).
FINE POLE: 1/8" poles and 1/8" separators produce shallow flux lines for holding small and thin parts.
STANDARD POLE | ||||||
MODEL # | Diameter (A) | Counterbore Diameter (B) |
Bolt Circle (C) | Tapped Holes (D) | Height (E) | WEIGHT |
RMC-20 | 20-1/4" | 11" x 1/4" | 12-13/32" | (6) 3/8-16 | 3-1/2" | 205 lbs. |
See all Suburban Round Magnetic Chucks
For more info, visit www.p65warnings.ca.gov.