TMX CAT40 Shell/Face Mill Arbor Holders
- Works with arbor mounted face mills
- DIN AD/B + C Coolant Specifications – allow for coolant delivery at the point of cut for indexable shell mills and face mills
- AD is coolant through the spindle; B is coolant through the flange; C is coolant through exiting at the point of cut.
- Balance and certified to 15,000 RPM / G6.3
- QA Lab inspected for dimensional accuracy
- Machined and shot blast exterior for surface integrity
- Compatible with standard machines
- CAT40 Flange Screws: M4 x .7 x 4mm long= 8-815-180
- Max run out of .0002” (.005mm) TIR ANSI B5.50-1994
- AT3 taper accuracy for excellent holder / spindle engagement
Item No. | 8-120-4005 | 8-120-4010 | 8-120-4015 | 8-120-4020 |
Arbor Pilot Dia. D2 | 1/2" | 1/2" | 3/4" | 3/4" |
Gage Length L1 | 1-3/8" | 4" | 1-3/8" | 4" |
Head Dia. D1 | .62" | .62" | .88" | .88" |
Pilot Length L2 | .56" | .56 | .68" | .68" |
Major Dia. D3 | 1.44" | 1.44" | 1.69" | 1.69" |
Neck Dia. D4 | - | - | - | - |
Arbor Screw Thread | 1/4-28 | 1/4-28 | 3/8-24 | 3/8-24 |
Key Width | 1/4" | 1/4" | 5/16" | 5/16" |
Item No. | 8-120-4025 | 8-120-4030 | 8-120-4035 | 8-120-4040 |
Arbor Pilot Dia. D2 | 3/4" | 1" | 1" | 1" |
Gage Length L1 | 6" | 2" | 4" | |
Head Dia. D1 | .88" | 1.18" | 1.18" | 1.18" |
Pilot Length L2 | .68" | .68" | .68" | .68" |
Major Dia. D3 | 1.69" | 2.19" | 2.19" | 2.19" |
Neck Dia. D4 | - | 1.75" | 1.75" | 1.75" |
Arbor Screw Thread | 3/8-24 | 1/2-20 | 1/2-20 | 1/2-20 |
Key Width | 5/16" | 3/8" | 3/8" | 3/8" |
Item No. | 8-120-4045 | 8-120-4050 | 8-120-4055 | 8-120-4060 |
Arbor Pilot Dia. D2 | 1-1/4" | 1-1/4" | 1-1/4" | 1-1/2" |
Gage Length L1 | 2" | 4" | 6" | 2-1/4" |
Head Dia. D1 | 1.50" | 1.50" | 1.50" | 1.88" |
Pilot Length L2 | .68" | .68" | .68" | .94" |
Major Dia. D3 | 2.75" | 2.75" | 2.75" | 3.81" |
Neck Dia. D4 | 1.75" | 1.75" | 1.75" | 1.75" |
Arbor Screw Thread | 5/8-18 | 5/8-18 | 5/8-18 | 3/4-16 |
Key Width | 1/2" | 1/2" | 1/2" | 5/8" |
Item No. | 8-120-4065 |
Arbor Pilot Dia. D2 | 1-1/2" |
Gage Length L1 | 4" |
Head Dia. D1 | 1.88" |
Pilot Length L2 | .94" |
Major Dia. D3 | 3.81" |
Neck Dia. D4 | 1.75" |
Arbor Screw Thread | 3/4-16 |
Key Width | 5/8" |
For Replacement Part Information CLICK HERE
For TMX CAT50 Shell/Face Mill Arbor Holders Click Here
For more info, visit www.p65warnings.ca.gov.