TMX CAT50 Shell/Face Mill Arbor Holders
- Works with arbor mounted face mills
- DIN AD/B + C Coolant Specifications – allow for coolant delivery at the point of cut for indexable shell mills and face mills
- AD is coolant through the spindle; B is coolant through the flange; C is coolant through exiting at the point of cut.
- Balance and certified to 15,000 RPM / G6.3
- QA Lab inspected for dimensional accuracy
- Machined and shot blast exterior for surface integrity
- Compatible with standard machines
- CAT50 Flange Screws: M5 x .8 x 5mm long= 8-815-185
- Max run out of .0002” (.005mm) TIR ANSI B5.50-1994
- AT3 taper accuracy for excellent holder / spindle engagement
| Item No. | 8-120-5005 | 8-120-5010 | 8-120-5012 | 8-120-5015 | 8-120-5020 |
| Arbor Pilot Dia. D2 | 1/2" | 1/2" | 1/2" | 3/4" | 3/4" |
| Gage Length L1 | 1-1/2" | 3-1/2" | 5-1/2" | 1-1/2" | 3-1/2" |
| Head Dia. D1 | .62" | .62" | .62" | .88" | .88" |
| Pilot Length L2 | .56" | .56" | .56" | .68" | .68" |
| Major Dia. D3 | 2.75" | 1.44" | 1.44" | 2.75" | 1.69" |
| Neck Dia. D4 | - | - | - | - | - |
| Arbor Screw Thread | 1/4-28 | 1/4-28 | 1/4-28 | 3/8-24 | 3/8-24 |
| Key Width | 1/4" | 1/4" | 1/4" | 5/16" | 5/16" |
| Item No. | 8-120-5025 | 8-120-5027 | 8-120-5030 | 8-120-5035 | 8-120-5040 |
| Arbor Pilot Dia. D2 | 3/4" | 3/4" | 1" | 1" | 1" |
| Gage Length L1 | 5-1/2" | 8" | 2" | 4" | 6" |
| Head Dia. D1 | .88" | .88" | 1.18" | 1.18" | 1.18" |
| Pilot Length L2 | .68" | .68" | .68" | .68" | .68" |
| Major Dia. D3 | 1.69" | 1.69" | 2.19" | 2.19" | 2.19" |
| Neck Dia. D4 | - | - | - | - | - |
| Arbor Screw Thread | 3/8-24 | 3/8-24 | 1/2-20 | 1/2-20 | 1/2-20 |
| Key Width | 5/16" | 5/16" | 3/8" | 3/8" | 3/8" |
| Item No. | 8-120-5042 | 8-120-5045 | 8-120-5050 | 8-120-5055 | 8-120-5057 |
| Arbor Pilot Dia. D2 | 1" | 1-1/4" | 1-1/4" | 1-1/4" | 1-1/4" |
| Gage Length L1 | 8" | 1-1/2" | 3-1/2" | 6" | 8" |
| Head Dia. D1 | 1.18" | 1.50" | 1.50" | 1.50" | 1.50" |
| Pilot Length L2 | .68" | .68" | .68" | .68" | .68" |
| Major Dia. D3 | 2.19" | 2.75" | 2.75" | 2.75" | 2.75" |
| Neck Dia. D4 | - | - | - | - | - |
| Arbor Screw Thread | 1/2-20 | 5/8-18 | 5/8-18 | 5/8-18 | 5/8-18 |
| Key Width | 3/8" | 1/2" | 1/2" | 1/2" | 1/2" |
| Item No. | 8-120-5060 | 8-120-5065 | 8-120-5070 | 8-120-5075 | 8-120-5080 |
| Arbor Pilot Dia. D2 | 1-1/2" | 1-1/2" | 1-1/2" | 1-1/2" | 2" |
| Gage Length L1 | 2.4" | 4" | 6" | 8" | 2.4" |
| Head Dia. D1 | 1.88" | 1.88" | 1.88" | 1.88" | 2.50" |
| Pilot Length L2 | .94" | .94" | .94" | .94" | .94" |
| Major Dia. D3 | 3.81" | 3.81" | 3.81" | 3.81" | 4.88" |
| Neck Dia. D4 | 2.75" | 2.75" | 2.75" | 2.75" | 2.75" |
| Arbor Screw Thread | 3/4-16 | 3/4-16 | 3/4-16 | 3/4-16 | 1-14 |
| Key Width | 5/8" | 5/8" | 5/8" | 5/8" | 3/4" |
| Item No. | 8-120-5085 | 8-120-5090 |
| Arbor Pilot Dia. D2 | 2" | 2" |
| Gage Length L1 | 4" | 6" |
| Head Dia. D1 | 2.50" | 2.50" |
| Pilot Length L2 | .94" | .94" |
| Major Dia. D3 | 4.88" | 4.88" |
| Neck Dia. D4 | 2.75" | 2.75" |
| Arbor Screw Thread | 1-14 | 1-14 |
| Key Width | 3/4" | 3/4" |
For Replacement Part Information CLICK HERE
For TMX CAT40 Shell/Face Mill Arbor Holders Click Here
