Mitutoyo Digimatic Holtest Three-Point Internal Micrometer Set, 0.8-2"/20.32-50.8mm - 468-978

Brand:   Mitutoyo
SKU:
468-978
ID:
314990
Range 0.8 - 2" / 20.32 - 50.8 mm
Setting Rings 1", 1.6"
Remarks with extension rod & TiN-coated contact points
$4,540.00
Current Stock:
Adding to cart… The item has been added

Mitutoyo

Mitutoyo Digimatic Holtest Three-Point Internal Micrometer Set, 0.8-2"/20.32-50.8mm - 468-978


These are three-point internal micrometers that offer you the following benefits:

  • Interchangeable head set.
  • Titanium-coated measuring pins give you excellent durability and impact resistance.
  • They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
  • Large LCD display with character height of 7.5mm enables you to read measurements easily.
  • With setting rings and extensions.


Features:

  • TiN-coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole.(up to 100mm/4"models)
  • Large LCD readout.
  • Functions available: Presetting, Zero/ABS, power On/Off Data hold, Data out put, Error alarm, Battery replacement alarm.
  • With Ratchet Stop for constant force.
  • Can measure deep holes by attaching an Extension rod(optional).
  • Setting rings for origin point setting are optional.
  • Supplied in fitted plastic case up to 100mm / 4". Over 100mm / 4" supplied in wooden case.


Technical Data:

  • Accuracy: Refer to the list of specifications.
  • Resolution: 0.001mm or .00005"/0.001mm (over 5" models: .0001"/0.001mm)
  • Contact point: TiN-coating
  • Measuring method: Three-point method
  • Display: LCD
  • Battery: SR44 (2 pcs.), 938882
  • Battery life: Approx. 8 months under normal use


Function:

  • Zero-setting, Data hold, Data output, Preset, inch/mm conversion (inch/mm models)
  • Alarm: Low voltage, Counting value composition error


Optional Accessories:

  • 05CZA662: SPC cable (1m / 40") 
  • 05CZA663: SPC cable (2m / 80") 
  • 04AZB157: Mounting plate for stand
  • 156-101: Stand
  • 952322: Extension rod 100mm / 3.94" For range 6-12mm / .275 - .5" models
  • 952621: Extension rod 150mm / 5.9" For range 12-20mm / .5" - .8" models
  • 952622: Extension rod 150mm / 5.9" For range 20-50mm / .8" - 2" models
  • 952623: Extension rod 150mm / 5.9" For range 50-300mm / 2" - 12" models


Specifications:

Range 0.8 - 2 inch
Individual ranges 0.8-1", 1-1.2", 1.2-1.6", 1.6-2"
Setting rings included ø1" (177-184)ø1.6" (177-291)
Mass 1170 g
Digital step 0,001 mm, 0,001 mm/0.00005" (models up to 4") / 0,001 mm/0.0001" (models over 5")
Measuring pins Titanium coated tungsten carbide (6-12 mm) Titanium coated hardened steel (12-200 mm) Taper: tungsten carbide
Battery life approx. 1.2 years
ZERO/ABS Yes
Auto Power OFF after 20 min. non use Yes
2 x PRESET Yes
Low voltage alarm Yes
Function lock Yes
Data output Yes
HOLD Yes
Digital/Analog Digital
Accuracy 6-20 mm : ±2 µm 20-100 mm : ±3 µm 100-300 mm : ±5 µm * The given precision value require close contact of the measuring surfaces.
Inch-Metric Inch/Metric

 

Order No Range Individual
Range
Setting Rings
Included
Remarks
468-978 0.8 - 2"
20.32 - 50.8 mm
0.8 - 1"
1 - 1.2"
1.2 - 1.6"
1.6 - 2"
1" DIA
1.6" DIA
with extension rod/
with TiN-coated contact points



See all Mitutoyo Digimatic Holtest Three-Point Internal Micrometer Sets

Mitutoyo Digimatic Holtest Three-Point Internal Micrometer Set, 0.8-2"/20.32-50.8mm - 468-978

Mitutoyo Digimatic Holtest Three-Point Internal Micrometer Set, 0.8-2"/20.32-50.…

Mitutoyo Digimatic Holtest Three-Point Internal Micrometer S…

$4,540.00